厦门新建智能化两片罐生产基地项目品控自动化仪器包括罐前端尺寸综合检测仪、全自动罐底耐压检测仪、全自动罐身轴向承压力测试仪、前端自动检测仪、多工位罐内涂膜完整性测定仪、ME自动检测仪、后端自动检测仪、Buckle自动检测仪、轴压自动检测仪、罐后端尺寸综合检测仪、罐滑度测试仪、全自动卷边投影仪、静音卷封锯、罐底整形内径测定仪和2种校准器。

a)罐前端尺寸综合检测仪：手动测量两片罐罐身壁厚、罐身高度、底拱深度，操作方式便捷；配备专用发数模组，可实现SPC直连发数；仪器检测精度标准为罐身壁厚：0.001mm，罐身高度：0.01mm，底拱深度：0.01mm。

b)全自动罐底耐压检测仪：该仪器应具备自动测量进样、自动测量罐底耐压力功能，并配备罐底增长模块功能；该仪器的量程应为0 - 900Kpa，分度应为1Kpa。

c)全自动罐身轴向承压力测试仪：该仪器必须配备自动测量进样及自动测量功能；该仪器的量程应为300kg，分度应为1N，样品范围应为罐口内径200mm和202mm，样品罐高范围应为88 - 188mm，精度应为0.2% FS，测试行程应为150mm。

d)前端自动检测仪：该仪器应具备测量罐高、上壁厚度、中壁厚度、底拱深度参数的功能；该仪器的精度应为罐身壁厚：±0.001mm、底拱深度：±0.01mm、罐身高度：±0.01mm；该仪器的分度应为罐身壁厚：0.0001mm、底拱深度：0.001mm、罐身高度：0.001mm。

e)多工位罐内涂膜完整性测定仪：该仪器应使用双工位半自动控制测量方式，两个工位可以轮流或同时测量；该仪器的测量范围应为0 - 500mA，分度应为0.01mA，精度应为±2%，单位应为mA；检测速度应达到每罐5秒。

f)ME自动检测仪 ：该仪器需配备三通道自动进样装置，以实现对多种罐型样品的测试；该仪器应无需更换调整任何夹具零件，即可适合不同罐高、不同罐口内径和罐径的样罐测量；该仪器应配备数据库管理软件，方便客户对测量数据进行查询、统计；应可保存测量结果到Excel电子表格。

g)后端自动检测仪：该仪器需配备三通道自动进样装置，以实现对多种罐型样品的测试；该仪器应采用非接触式激光法，可以自动测量两片罐的翻边宽度、罐身高度、罐口内径、底拱深度、翻边角度、卷封净空、再成形直径、再成形高度、罐底最小直径；该仪器的准确度应为±0.01mm，重复精度应为0.025mm；该仪器需自动分拣不及格样品，并配备不合格品留样通道，方便使用者对不合格品进行分析。

h)Buckle自动检测仪：该仪器需配备三通道自动进样装置，以实现对多种罐型样品的测试；该仪器应具备自动测量罐底耐压力的功能，并配备罐底增长模块功能、罐底耐压检测仪软件；该仪器应具备双工位，无需更换任何零件就可以同时适合测量两种罐身直径的样品，无需更换夹具就能同时测量缩颈罐和直身罐；该仪器的量程应为0 - 900Kpa，分度应为1Kpa。

i)轴压自动检测仪：该仪器需配备三通道自动进样装置，以实现对多种罐型样品的测试；该仪器应具备双工位，无需更换任何零件就可以同时适合测量两种罐口内径的样品；该仪器的量程应为0 - 3000N，单位应可选N、Kg、Lb；轴压行程应为150mm，分辨率应为1N。

j)罐后端尺寸综合检测仪：该仪器应具备手动测量翻边宽度、罐身高度、罐口内径的功能；该仪器的分度应为0.01mm。

k)罐滑度测试仪：该仪器应采用电气、机械分体式设计，配备独立控制盒，以便于检查和维护；该仪器的摩擦系数测量范围应为0.0 - 0.50，分度应为0.001。

l)全自动卷边投影仪：该仪器的分度应为0.001mm，精度应为0.005mm，放大倍数应为60×，选点放大倍数应为180×；该仪器应采用Golden Lens®光学系统和镜头，以保证成像清晰。

m)静音卷封锯：该仪器应具备独立的开关按钮，以实现更安全的电气设计，并符合国内安全要求；该仪器的锯片规格应为80×22×0.5mm，切割转速应为1000转/分，样品范围应为65mm，电源应为220V/100Hz。

n)罐底整形内径测定仪：该仪器应用于测量罐底整型内径；该仪器的分度应为0.01，精度应为±0.02mm。

o)校准器（校准罐底耐压检测仪）：该仪器用于校准耐压检测仪。

p)校准器（校准轴向承压测试仪）：该仪器用于校准罐身轴向承压力测试仪。

其他要求详见招标文件内容。

（1）未被国家企业信用信息公示系统(www.gsxt.gov.cn)列入严重违法失信企业名单;

（2）未被“信用中国”网站(www.creditchina.gov.cn)列入失信被执行人名单;

（3）投标方或投标设备的制造商应具有与招标设备同类的所有设备（不含校准器）的业绩。

The automatic quality control equipments for the project of a new intelligent two-piece can production base in Xiamen include can front-end dimension tester, fully automatic can bottom pressure tester, fully automatic can body axial compression tester, automatic front-end gauge, multi-station can internal coating integrity tester, automatic ME gauge, automatic back-end gauge, automatic Buckle gauge, automatic axial pressure gauge, can back-end dimension measurement gauge, can surface friction coefficient tester, fully automatic seam projector, silent seam cutter, can bottom ID gauge, and two types of calibrators.

a)Can Front-End Dimension Gauge: Manual measurement of can body wall thickness, can height, and dome depth with user-friendly operation. Equipped with a dedicated data transmission module for direct SPC connectivity. Measurement accuracy tolerance for wall thickness, can height and dome depth shall be 0.001mm, 0.01mm, and 0.01mm respectively.

b)Automatic Can Bottom Pressure Gauge: This instrument shall feature automatic sample feeding, automatic measurement of can bottom pressure resistance, and be equipped with a can bottom growth module. Measurement range: 0 - 900Kpa with 1Kpa resolution.

c)Automatic Can Body Axial Compression Gauge: The tester shall be equipped with automatic sample feeding and measurement capabilities. Measurement range shall be 300kg with 1N resolution. The tester shall be compatible with inner lid diameters of 200mm/202mm, can heights from 88 - 188mm, accuracy of 0.2% FS, and test stroke of 150mm.

d)Automatic Front-End Gauge: The instrument shall be capable of measuring can height, upper wall thickness, middle wall thickness, and bottom arch depth. Measurement accuracy: can wall thickness: ±0.001mm, bottom arch depth: ±0.01mm, can height: ±0.01mm; graduation: can wall thickness: 0.0001mm, bottom arch depth: 0.001mm, can height: 0.001mm.

e)Multi-station Can Internal Coating Integrity Tester: Two-station and semi-automatic control shall be used for measurement, and the two stations can work alternately or simultaneously. Measurement range: 0-500mA, graduation:0.01mA, accuracy: ±2%, and unit: mA. The detection speed shall reach 5 seconds per can.

f)Automatic ME Gauge: A three-channel automatic sample-feeding device shall be equipped to realize one-time testing of multiple can-type samples. The instrument shall be suitable for measuring sample cans with different can heights, different can mouth IDs and can diameters without replacing or adjusting any fixture parts. Database management software shall be provided to facilitate customers to query and analyze measurement data and save measurement results to an Excel spreadsheet.

g)Automatic Back-End Gauge: A three-channel automatic sample-feeding device shall be equipped to realize one-time testing of multiple can-type samples. The instrument shall adopt a non-contact laser method, which can automatically measure the flange width, can height, can mouth ID, bottom arch depth, flange angle, seaming clearance, reforming diameter, reforming height, and minimum can bottom diameter of two-piece cans. Accuracy: ±0.01mm, repeatability accuracy: 0.025mm. The instrument needs to automatically sort out unqualified samples and be equipped with an unqualified sample retention channel to facilitate users to analyze unqualified products.

h)Automatic Buckle Gauge: A three-channel automatic sample-feeding device shall be equipped to realize one-time testing of multiple can-type samples. Automatic measurement of the pressure resistance of the can bottom/buckle shall be provided, along with a can bottom growth module and corresponding software for the pressure resistance tester. The instrument shall have two stations, which can be suitable for measuring samples with two different can diameters without replacing any parts, and can measure necked-in cans and straight cans without replacing fixtures. Measurement range: 0-900Kpa, graduation: 1Kpa.

i)Automatic Axial Pressure Gauge: A three-channel automatic sample feeding device shall be equipped to realize the testing of various can-type samples. The instrument shall have two stations, which can be suitable for measuring samples with two different can-mouth IDs without replacing any parts. Pressure range: 0-3000N, units: N, Kg and Lb, which can be used through selection; axial pressure stroke: 150mm, and resolution: 1N.

j)Can Back-End Dimension Measurement Gauge: The instrument shall be able to manually measuring the flange width, can height, and can mouth ID. Graduation: 0.01mm.

k)Can Surface Friction Coefficient Tester: The instrument shall adopt an electrical and mechanical split design and be equipped with an independent control box for easy inspection and maintenance. Friction coefficient measurement range: 0.0-0.50, and graduation: 0.001.

l)Fully Automatic Seam Projector: Instrument graduation: 0.001mm, accuracy: 0.005mm, magnification 60×, and point selection magnification: 180×. Golden Lens® optical system and lens shall be adopted to ensure clear imaging.

m)Silent Seam Cutter: An independent switch button shall be equipped for the tool to realize a safer electrical design and meet domestic safety requirements. Cutter blade size: 80×22×0.5mm, cutting speed: 1000 rpm, sample size: 65mm, and power supply: 220V/100Hz.

n)Can Bottom ID Gauge: The instrument is used to measure the internal diameter of the can bottom. Graduation: 0.01, and accuracy: ±0.02mm.

o)Calibrator (calibrating Automatic Can-bottom Pressure Gauge): The instrument is used to calibrate the pressure gauge.

p)Calibrator (calibrating Automatic Can-body Axial Compression Gauge): The instrument is used to calibrate the can body axial pressure gauge.

Please refer to the bidding documents for other requirements.

(1)Not included in the list of seriously illegal and dishonest enterprises by the National Enterprise Credit Information Publicity System (www.gsxt. gov.cn).

(2)Not included in the list of dishonest persons subject to enforcement by the "Credit China" website (www.creditchina. gov.cn) .

(3)The bidder or manufacturer of the bidding equipment shall have performance in all equipment of the same type as the bidding equipment (excluding calibrators).